EU CLASSIC
For direct and permanent marking of products with conductive surfaces.
Marking System Properties:
- Material hardness is not important;
- Marking is both abrasion-resistant and permanent;
- Marking for any surface shape;
- Non-corrosive marking;
- Depending on the material, the colour of marking is either black or white;
- Allows even deep marking;
- Low purchase and operation costs;
- Low maintenance demands;
EU CLASSIC – these are manual marking devices used for simple and fast marking of products with conductive character. The marking is done by electric pulses that are led through a special template; an accurate picture of the template is thus created on the surface of the part.
By simply pressing a button, you may choose between alternating and direct current. Alternating current is used for black or white marking, depending on the material. Direct current allows deep marking.
Marking devices are equipped with a time switch, allowing to set the marking time from 0.1 s to 20 s. Set marking time and other parameters of marking are shown on a one-line backlit display; they may be changed by pressing a button.
If you wish to mark hard steel, e.g. tools, an output for hard steel is then recommended for accessories of the basic equipment. Different voltage coming out of this output allows you to achieve the best marking results with hard materials.
Other accessories, such as a stand for the hand device or systems for the production of simple templates for frequently changed texts, are also available.
the selection of recommendations
